This tutorial was written by me on May 9th, 2016 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X5

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the art of Misticheskaya. You can purchase her tubes here.

PTU kit by BLT DeZignZ called Guided Tour. You can purchase this kit directly from her through her FB Fan Group here.

Font of choice. I am using Willona.

——————–

Open a new blank canvas, 851 x 315.

Open PP11. Resize by 24%. Paste as a new layer onto your canvas.

Lets add our elements first:

LightPole – resize by 15%. Place to the right side of you canvas.
Branch – resize by 30%. Place to the bottom right. Duplicate, flip horizontal & place to the bottom left.
PostCard – resize by 10%. Place to the bottom left corner. Rotate slightly to the left & then move it below the duplicate branch layer.
Flower8 – resize by 6%. Paste as a new layer above the duplicate branch layer. Place to the bottom.
Flower11 – resize by 10%. Place to the left side of the previous flower. Duplicate & place to the right side of the previous flower. Now move the previous flower (first flower) to the top layer.
Money – resize by 8%. Place to the right of the post card.
QuillTip – resize by 6%, flip horizontal. Place to the bottom right of the post card.
Camera – resize by 6%. Place to the bottom left corner.
Luggage – resize by 12%. Place to the bottom right corner.
Butterfly – resize by 8%. Place to the left side of the luggage. Rotate slightly to the right.

Open your tube. Paste as a new layer above your paper layer. Duplicate two more times & arrange all three copies over your paper layer. When satisfied with the placement, merge your tube layers together. Duplicate, gaussian blur, 3.00. Set the blend mode to Screen. On the original merged tubes layer, set the blend mode to Soft Light.

On the screen layer, Effects, Artistic Effects, Halftone using the following settings:

Paste your tube again, this time just above the duplicate branch layer. Resize your tube as necessary & place to your liking. Duplicate your tube, gaussian blur 3.00. Set the blend mode to Screen.

Click on the top layer in your layer palette. Add a new raster layer & floodfill with #ecf2e8. Select all, modify, contract by 8. Press delete & deselect.

Select all again.

Open PP5 & resize by 24%. Paste as a new layer. Selections, modify, contract by 5. Press delete & deselect. Add noise to this layer, gaussian, 50, monochrome checked.

Add your name, copyright, & license info. Apply a drop shadow of choice.

For your avatar:

Use your crop tool to crop the area of the timeline that you wish to use. I made the avatar 160 x 160.

Delete your frame layers & your text layers. Re-add your frame layers as before & then retype your name, copyright, & license info.

Save each as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on April 26th, 2016 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X5

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the art of Ana Neves. You can purchase her tubes here.

PTU kit from BLT DeZignZ called Pirouette. You can purchase this kit directly from the designer through her fan group here.

Template 804 by Millie’s PSP Madness. You can find it here.

Mask 2 by me. You can find it here.

Font of choice. I am using Pateglamt Script.

——————–

Open your template. Set the canvas size to 800 x 700. Resize all layers by 75%. Delete the following layers: credits, 14, 13, 12, & 11.

Merge together the following layers: 1 & 2; 3 & 4; 5 & 6; 7 & 8.

Open PP13. Resize by 17%. Open your mask & minimize it. Paste your paper as a new layer just above the background layer of your template. Apply your mask, merge group.

Replace each layer with the following (resize each paper by 17% before replacing the template layers):

1 – PP6
3 – PP11
5 – PP12
7 – PP3
9 – PP5

On layer 10, select all, float, defloat. Add a new raster layer & floodfill with #bca4d8. Deselect & delete the original layer.

Now lets add our elements:

Umbrella – resize by 10%. Paste as a new layer above the raster 5 layer. Place to the top right, rotate slightly to the right.
Bow2 – resize by 6%. Paste as a new layer above the top layer. Rotate slightly to the left. Place to the upper left corner of the purple frame.
ClockHands – resize by 15%. Place to the upper right corner of the frame. Duplicate, free rotate to the right 180 degrees. Place to the bottom left corner of the frame.
Dress – resize by 30%. Place to the right side.
Feathers – resize by 8%. Place to the bottom.
Telephone – resize by 8%. Place to the bottom right.
Branch – resize by 8%, rotate right. Place to the bottom.
Flower9 – resize by 8%, flip horizontal. Place to the bottom left of the frame.
Dancer – resize by 15%. Place to the bottom left.
Flower1 – resize by 12%. Place to the bottom right of the dancer.
BalletShoes – resize by 5%. Place to the bottom left of the dancer.
Heart – resize by 10%. Place to the right side of flower1. Rotate slightly to the right.
Cat – resize by 15%. Place to the bottom right, between the heart & the phone.

Open your tube, resizing as necessary. Paste as a new layer above the duplicate ClockHands. Arrange your tube over the frame. Erase any part of the tube that extends below the flowers or beyond the dancer. Duplicate your tube, gaussian blur 3.00. Set the blend mode to Overlay, 80.

Add your name, copyright, & license info. Apply a drop shadow of choice, then merge visible. Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on April 14, 2016 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X5

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the art of Chris Pastel. I purchased this tube when he sold through Inzpired Creationz Store, which is now closed. You can now purchase his tubes here and here.

PTU kit from BLT DeZignZ called Secretly. You can purchase this kit directly from her in her fan group here.

Template 810 by Millie’s PSP Madness. You can find it here.

Mask 9 by HorsePlay’s Pasture. You can find it here.

Font of choice. I am using Nouradilla.

——————–

Open your template. Delete the following layers: credits, 13, 11, 9, 7, & 5.

Merge together the following layers: 1 & 2; 3 & 4; 8, 10, & 12.

Resize all layers by 86%. Set the canvas size to 600 x 500.

Open your mask & PP12. Resize your paper by 17%. Copy & paste your paper as a new layer above the background layer of your template. Apply your mask, merge group.

Replace each layer with the following (resize each paper by 17% before replacing each template layer):

1 – PP14
3 – PP4
6 – PP8
8 – PP7

On your top layer, select all, float, defloat. Selections, modify, expand by 2. Open PP3 & resize by 17%. Copy & paste as a new layer just below this top layer. Selections, invert & press delete. Deselect. Adjust, add noise, gaussian, 25, monochrome checked.

Now to add our elements:

Flower9 – resize by 32%. Paste as a new layer just above the large square layer.
Scatter – resize by 14%, flip vertical. Paste as a new layer above all the other layers. Place to the top of the template.
Book – resize by 15%. Place to the bottom left. Rotate slightly to the left.
Chain – resize by 10%. Place to the upper left corner of the far left small square.
Bow2 – resize by 8%. Place to the top of the chain.
Flower2 – resize by 8%. Place to the upper right.
Angel – resize by 12%. Place to the bottom right.
Tassel – resize by 15%. Place to the left side of the book.
Heart2 – resize by 12%. Place to the bottom of the book. Rotate slightly to the right.
Necklace – resize by 28%. Place to the bottom.
Flower8 – resize by 4%. Place to the bottom, along the necklace.
Flower1 – resize by 6%. Place to the right side of the previous flower. Move this layer below the previous flower layer. Duplicate & place to the left side of the top flower.

Open your tube, resizing as necessary. Paste as a new layer above the top squares layer. Arrange over the squares On the top squares layer, select all, float, defloat. On each tube layer, selections, invert & press delete. Deselect. If you see any tube copy showing over another copy, just use your eraser tool to erase it. Merge your tube layers together. Duplicate, gaussian blur 3.00. Set the blend mode to Screen. On the original merged layer, set the opacity to 35.

Paste your tube again, this time above the flower in the upper right corner. Place to your liking.

Add your name, copyright, & license info. Apply a drop shadow of choice to your layers. Merge visible & save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on April 3rd, 2016 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X5

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the art of Barbara Jensen. You can purchase her tubes here.

PTU kit from BLT DeZignZ called My Fairy Tale. You can purchase it directly from the designer through her FB Fan Group here.

Mask of your choice.

Font of choice. I am using Samuella Script.

——————–

Open the FrameAccent. Resize all layers by 17%.

Open the Jewel. Resize by 65%. Paste as a new layer above the frame accent layer.

Use your magic wand & click inside the jewel layer. Selections, modify, expand by 10. Open PP4 & resize by 22%. Copy & paste as a new layer. Selection, invert & press delete. Deselect & move the paper layer below the frame accent layer.

Open PP12 & your mask. Resize your paper by 22%. Paste as a new layer onto your working canvas. Apply your mask, then merge group. Move this layer to the bottom.

Now to add the remaining elements:

Feather – resize by 15%. Paste as a new layer above the jewel layer. Place to the top left over the jewel.
Bow1 – resize by 15%. Place to the top of the jewel.
Beads – resize by 20%. Place to the bottom. Duplicate, rotate 90 degrees to the right. Move slightly up.
Flower10 – resize by 10%. Place to the bottom right.
Leaf – resize by 6%. Place to the bottom right. Duplicate, flip horizontal & place to the bottom right.
Flower8 – resize by 8%. Place to the left of the right leaf. Duplicate, flip horizontal & place to the right of the left leaf.
Flower6 – resize by 14%. Place to the bottom, between the two purple flowers.
CupSaucer – resize by 10%. Place to the bottom, slightly to the right of the right purple flower.
Frog – resize by 15%. Place to the bottom right of the cup.
Crown – resize by 4%. Place to the bottom left.
Apple – resize by 4%. Place to the right of the apple, moved slightly down.

Add your name, copyright, & license info. Apply a drop shadow of choice to your layers, then merge visible. Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on February 28th, 2016 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X5

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the art of Barbara Jensen. You can purchase her tubes here.

PTU kit from BLT DeZignZ called Sultan’s Treasure. You can purchase this kit exclusively through her Facebook Fan Group here.

2016 Floral Mask 2 from Leather & Lace Ads. You can find it here.

Font of choice. I am using Victorian Parlor Vintage Alternate.

——————–

Open a new blank image, 600 x 600.

Open Frame 2. Resize by 18%. Paste as a new layer onto your blank canvas.

Open your mask. Set the canvas size to 800 x 800, Placement – Center, Background black.

Open PP8. Resize by 22%. Paste as a new layer below your frame layer. Apply your mask, merge group.

On your frame layer, use your magic wand & click inside the frame center. Selections, modify, expand by 2. Now open PP10 & resize by 22%. Paste as a new layer above the mask layer. Selections, invert & press delete. Deselect.

Now to add our elements:

Flower1 – resize by 12%. Place as a new layer above the frame, along the upper right side of the frame.
Ribbon – resize by 21%. Place to the bottom.
Berries – resize by 12%. Place to the bottom right.
Scatter – resize by 8%. Place to the bottom, slightly to the right.
JewelCluster – resize by 20%. Place to the bottom left.
Clock – resize by 8%. Place to the bottom right.
Flower6 – resize by 10%. Place to the bottom, slightly to the left. Duplicate & place the copy slightly to the right of the center.
Flower2 – resize by 10%. Place between the two brown flowers.
Key – resize by 8%. Place to the bottom of the jewel cluster.
Hummingbird – resize by 5%, flip horizontal. Place to the top right of your frame.
Jewel3 – resize by 12%. Place to bottom right of the clock.

Open your tube. Paste as a new layer above the first flower layer, resizing as necessary. Flip horizontal if you desire. Use your rectangle selection tool to erase any part of the tube that hangs below the ribbon.

Add your name, copyright, & license info. Apply a drop shadow of choice to your layers, if desired. I used 2, 2, 30, 5.

Merge visible & save as a PNG.

Thanks for checking out my tutorials.